Standard rubber and PU hi-bounce balls are the high-volume end of the range, used by schools for sports days and active play promotions, sporting clubs for event giveaways, and event organisers who need a low-cost branded item with active use value. LED and light-up styles sit at the upper end and work differently. On impact, they, flashing each time the ball hits a surface, which makes them the relevant choice for evening events, concert activations, and any context where a ball that lights up in low-light conditions adds visual impact. Both styles take pad printing on the curved rubber surface. The range starts from around 100 units on most styles.
Standard balls ordered for daytime distribution and LED styles ordered for evening activation can carry the same logo artwork, applied via pad printing to both. The standard styles work during the day when LED activation isn't relevant, and the light-up styles create a more visible spectacle in the evening when a glowing ball in low-light conditions is harder to miss.
LED and light-up styles activate on impact rather than running continuously, which keeps battery life suitable for event use. The Inflatable Jumbo LED Glow Ball reaches 20 inches in diameter, functioning as a display piece as well as a giveaway.
Worth Knowing
What materials are used across the range?
The standard hi-bounce styles are made from natural rubber or PU, both of which give the high-bounce characteristic and take pad printing well on the curved surface. LED styles use a rubber or PU outer shell with an internal light mechanism that triggers on impact.
Which styles suit schools and children's events?
The standard rubber and PU hi-bounce balls are the most practical choice for schools and children's events because they're compact, lightweight, low-cost, and actively used by children rather than set aside. They suit sports day giveaways, show bag fillers, and active play promotions where the ball gets used on the spot rather than stored.
Are any styles available on express turnaround?
Two best-seller styles in the range are available on 24-hour and 3-day express production, making them the practical option when event deadlines are close. Other styles in the range operate on standard production timelines, so confirming the turnaround requirement at the time of enquiry is the right step for any time-sensitive order.
What is the print area size on a bouncing ball?
The print area is circular, sitting on the top or bottom face of the ball, typically 25 to 30mm in diameter. Artwork should be simplified to a clean logo or bold mark, since fine detail doesn't reproduce clearly at that scale on a curved rubber surface.
